Recently it arrived very powerful Android TV Box called H96 MAX which we also reviewed here. But unfortunately some of them comes with not stable ROM. So because of that one user has created much better ROM which fixes most problems. And now with these custom ROM you can normally use the TV box.

So here you can download this custom ROM: link

Also to flash your H96 MAX you will need to download Rockchip Batch tool latest version here, and you will also need to download Rockchip Driver Assistant here.

Before we start we need to mention that these process you are doing on your own risk. For this flashing purpose you need to have USB cable male to male. Or you can make your own USB cable.

After you do that first you need to install drivers using Rockchip Driver Assistant, and if you are asked for some confirmation just click yes and confirm it.

Therefore you will need to open the case of the box, and it is quite easy to do that. After you do that see this picture below:

Behind yellow 3.5 inch connector is located reset button which you can reach with toothpick or something similar.

So you will now need to start Rockchip Batch tool, after that you need to click the reset button and hold it until you connect USB cable with box and your computer. You need to connect to blue usb port on the box. After that Rockchip Batch tool should recognize H96 MAX, and when it does you can stop holding the reset button.

When you’re done with that now we need to choose the file of downloaded ROM. But before you do that you will need to extract the file on desktop.

And last step you need to you click upgrade, and then wait to complete flashing.

2 COMMENTS

  1. FYI: you do not need to take the case off to access the “Reset” button in the AV-Port, just use a small stick, like a toothpick, I used the plastic straw from my canned-air. Anything similar would work.

LEAVE A REPLY